Category Archives: Doors

How to install a wireless doorbell

wireless doorbell

Installing a new wireless doorbell is a great way to improve your home, learn  how to remove an old doorbell and install a new one with expert tips and advice  on home improvement in this free video.

  • 1 Determine how many button units you need by deciding how many doors you want to equip with a doorbell. You can choose from a variety of sounds, so find one you like.
  • 2 Determine how many receivers, or sound units, you want or need. Wireless doorbells allow you to put receivers throughout your home so you will always be able to hear the doorbell-if that’s what you want.
  • 3 Look for a wireless doorbell kit containing any additional features you want. You can get a simple kit or get something with intercom capabilities or even video features. Some kits even have a light that flashes in sync with the bell to help residents with hearing impairments.
  • 4 Place batteries in the button unit(s).
  • 5 Screw the button unit into the wall outside near the door, or attach it with an adhesive.
  • 6 Plug the receiver, or sound unit, into an electrical outlet. Check your doorbell’s packaging to see if the button and receiver have a maximum distance they can be located from one another. If you have more than one receiver, determine the other locations for them and plug them in.

If you have found this funny facebook like or twitter this post. Support the newest and best DIY guides website around!

How to remove paint from a door

paint stripper

Things You’ll Need

  • Paint remover
  • Newspaper
  • Paint brush
  • Gloves
  • Safety mask
  • Scraper
  • Sand paper
  • Trash bags or  plastic

Instructions

1 Prepare your work area. If possible, this is an outside job. If you can take  the door outside you will prevent fumes from the paint remover from overwhelming  your home. If removing the paint outside is not an option, make sure you have a  work area with lots of windows that can be opened. Lay out trash bags or other  plastic in the area you are working in and over that lay newspapers in several  layers. This will help protect the floor you are working  on.

2 Put on your own safety gear. This should include gloves and a face mask.  Appropriate items for this particular job are sold at local home improvement  stores. Breathing the fumes from the paint remover is not healthy. Make sure you  read all safety precautions and directions on the paint  remover.

3 Brush on a layer of paint remover. Work on one side of the door at a time.  You will have to give the paint remover time to work. Follow the guidelines on  the can. The amount of time needed will be listed and can vary depending on how  many layers of paint are on the door.

4 Use the scraper to carefully begin lifting the paint from the door. Make sure  you have a save container to put the paint scraps in. Old paint cans that still  have the lids are perfect for this. Make sure the cans are disposed of  properly.

5 Be prepared to do some sanding. Paint is likely to linger in cracks and  crevices and can be difficult to remove. Try sanding it. Another good tip is to  use a butter knife or metal file to remove paint from the  cracks.

6 Allow the door to completely dry before beginning the same process with the  other side. Flip the door over carefully and begin again on the other side.  Allow both sides to dry completely before doing any painting or staining to the  door. If the paint remover is not completely dry, it can interfere with the new  paint.

How to change a door handle

The video cannot be shown at the moment. Please try again later.

Do it yourself guide to replacing a door handle. This can be done for aesthetic reasons or to replace a broken handle.